Changelog
Follow up on the latest improvements and updates.
RSS
What's new
"Get post URLs" in the Page Vault Browser gained two improvements for Instagram and TikTok profiles.
Instagram captions in the post list
- The CSV for an Instagram profile now has a caption column next to each post URL.
- Posts and reels both get their caption, with emoji and line breaks kept.
- A post with no caption has an empty cell and still has its date.
Date range for Instagram and TikTok
- You can set a start date, an end date, or both before the scrape runs. A "Last 30 days" preset is included.
- Only posts inside the range are listed.
- The scrape stops once it reaches posts older than the start date, so a short range on a large profile finishes much sooner than a full scrape.
- Pinned posts at the top of a profile do not stop the scrape early.
- A post whose date cannot be read is still listed.
- With no range set, every post is listed, as before.
Why it matters
Before, you had to scrape a whole profile, then open posts one by one to see what each said and trim the URL list by hand to the dates you needed. That was slow and easy to get wrong in a forensic collection. Now the list shows what each Instagram post says and covers only the period you care about. You can choose what to capture straight from the list.
How to use it
- In the Page Vault Browser, open an Instagram or TikTok profile.
- Open the "Get post URLs" panel.
- Optionally, under the email field, set a start date, an end date, or both, or choose "Last 30 days".
- Run the scrape. For Instagram profiles, the CSV includes each post's caption.
Unless you are signed in to Instagram, post dates are estimated. A post can sit a few hours earlier than the date shown on the site.
Who gets it
This is on for every account.
What's new
The Page Vault Browser now captures stories without the manual copy-and-paste workaround.
- Instagram:Open an Instagram profile while signed in and clickGet stories. The browser collects the account's live stories and highlights and sends them to Batch. Videos go to a Videos job and photos go to a Documents job. The browser also captures the story viewer page as a PDF, with the username and the age label.
- Facebook:On a Facebook Page or profile, a newFacebook stories capturetype sits next to the page capture. It sends every card of the live story to a single Documents job named after the Page owner. You can also turn onCapture each story pageto save each story card's viewer page as a PDF. This option is off by default.
Why it matters
Before this release, capturing stories meant copying each media link by hand from a third-party site or from developer tools and pasting it into a Batch job. Now one action in the Page Vault Browser collects the stories for you and sends them to Batch right away.
How to use it
Instagram stories and highlights
- Sign in to Instagram in the Page Vault Browser.
- Open the profile you want to capture.
- Click Get stories.
Facebook stories
- Log in to Facebook in the Page Vault Browser. If you are not logged in, the capture stops and asks you to log in.
- Open the Page or profile.
- Choose Facebook stories capture. Turn onCapture each story pageif you also want a PDF of each story card.
Good to know:
- Stories are viewed as your own signed-in account. A private profile's stories are visible only if that account can see them.
- Story media links expire within hours, so the jobs are sent at once. A late retry of a photo can fail.
- If a Facebook Page has no live story, you see "This Page has no live stories right now."
- Facebook Pages have no highlights, so the Facebook capture covers live stories only.
- Some Facebook story cards have no media. These cards are skipped.
Who gets it
This feature is on for every account using the Page Vault Browser.

You can now see how many pages a capture will use before you run it. The capture panel in the Page Vault Browser estimates the PDF page count for the page you have open, so you can check it against your page limit before you commit.
What’s new
- An Estimated pages line now sits above the Cancel and Capture buttons. Click Calculate to measure the page with your current capture settings.
- The estimate scrolls the page the same way a real capture does, so long and lazy-loading pages are measured in full. It takes about half as long as a capture, and you can cancel at any time.
- Running an estimate doesn’t save anything or count toward your page limit.
Get a page count before you get approval
Teams told us they need a page count before a case team approves a capture, the same way they’d ask a vendor for a quote. Now you can run the estimate, share the number, and capture once it’s approved.
Good to know
- Estimates are available for single captures in the Page Vault Browser using standard capture types. They aren’t available for social media capture types, batch captures, or site crawls.
- The estimate only counts pages that apply to your page limit, so the cover page isn’t included.
- Video downloads aren’t included in the estimate. Each video counts as 10 pages toward your page limit.
- Estimates closely match the final count. Pages that change between estimating and capturing, like feeds with new posts, can shift the result.
Try it
Open a page in the Page Vault Browser, open the capture panel, choose your capture type and settings, and click Calculate next to Estimated pages.
What's new
The Page Vault Browser now keeps a record of the web pages you visit, so you can find and reopen them later.
- Browsing history screen:Pages are listed by day, newest first, with the time, title and address of each. You can search the list, click a page to open it in a new tab, and delete single entries.
- Clear by time range:You can clear your history for the last hour, last 24 hours, last 7 days or all time. A confirmation step comes first.
- Address bar suggestions:As you type in the address bar, matching pages from your history appear below it.
- History carries over between sessions:History is kept separately for each user and is still there when you end a session and start a new one.
- Clear on exit:A new "Clear browsing history on exit" setting deletes your history each time you end the session.
Why it matters
You no longer have to remember or retype the address of a page you visited earlier, even when you visited it in a previous session. You can go back to sources quickly and keep working on your captures. You also control your history: you can delete single pages, clear a time range, or have the browser clear everything each time you end a session.
How to use it
- Open the browser from Page Vault with Use Browser.
- Open the gear menu at the bottom of the sidebar and choose Browsing history.
- Type in Search historyto filter the list. Click a page to open it in a new tab, or hover a row and click its trash icon to delete it.
- To clear a time range, pick the range, click Clear browsing history, then confirm withClear.
- To clear your history automatically, go to the gear menu → Browser settings→Privacyand turn on "Clear browsing history on exit".
Who gets it
Browsing history is on for every Page Vault account.
If you've ever run a crawl and then needed to pick out just a handful of pages to capture, you know the drill: export the CSV, delete the rows you don't need, and re-upload the trimmed list into a new Batch job. It's the kind of extra step that pulls you out of Page Vault and into a spreadsheet.
Now that whole workflow happens from the crawl itself.
What's new
- Select one URL, several, or all of them right from the crawl results
- See at a glance which ones are already captured and which still need it
- Capture your selections with a single click — no CSV export or re-upload required
- Watch each row update in place, from "Capturing…" to a link to view the finished capture
Your first capture from a crawl asks you to choose a destination folder. Every additional capture from that same crawl saves there automatically — a crawl's captures can't be split across folders, though you can always move things afterward.
This has been requested before, and it's a natural way to keep your crawl-and-capture workflow inside the portal instead of splitting it across tools.
How to try it
Open any completed crawl-only job in your portal, select the URLs you want, and hit
Capture selected
(or Capture now
on a single row).Improvednew
Get your reports by email on a schedule
If you run the same report every month for billing or record-keeping, you can now set it up once and have Page Vault email it to you automatically.
What's new
- Schedule any report from Basic Reports or Cost Recovery to send weekly, monthly, quarterly, or yearly
- Send to yourself, your teammates, or people without a Page Vault login, like your billing or finance team
- Each email includes the report as a CSV attachment, so it's ready to file, forward, or import
- Send a test email first to check the report before the first scheduled send
- See every scheduled export for your account in one place, and pause, resume, edit, or cancel the ones you've created
No more monthly report reminders
Many teams told us they log in on the first of every month to pull the same report and send it on to billing. Scheduled exports removes that step. The report arrives on your cadence, with the same data you'd get from a manual export.
How to try it
Go to Reports, run the report you want, and click
Schedule exports
next to Export. Your current report type and filters carry into the schedule. Choose a frequency and recipients, then click Schedule exports
.Find all your scheduled exports on the new
Scheduled
tab.Good to know
- Available to everyone with access to Reports. Cost Recovery reports can be scheduled by anyone with Cost Recovery access.
- Emails send at 14:00 UTC.
- Every email includes an unsubscribe link for each recipient.
Learn more in our help article.
You can now update the Case/Matter ID on multiple snapshots and file captures at once. No more editing captures one by one.
What's new
- Select any combination of snapshots and file captures from the dashboard
- Open the Actions dropdown and choose Update Case/Matter ID
- Enter a Case/Matter ID to apply it across your whole selection, or leave the field blank to clear the existing ID
- Works on every capture type, including videos
- A confirmation displays when it's done

Cleanup that used to take hours, now takes seconds
If you've ever finished a batch capture and realized the Case/Matter ID was wrong or needed to reassign a folder of captures to a different matter you know how much clicking that took. This change closes that gap. Whether you're correcting a single mistake across hundreds of items or moving captures between matters, it's one action on a multi-select.
How to try it
Go to your dashboard, select the captures you want to update, click Actions, and choose Update Case/Matter ID. The dialog will show you how many items you've selected before you confirm.
Available now for all users.
When reviewing captures for client billing, it helps to know exactly which source page each capture came from. Until now, that meant tracking down the URL separately.
What's new
The "By Capture" report now includes a Capture URL column showing the original source URL of each captured page. It appears between Capture Name and User, both in the in-app table and in exports. Long URLs are truncated with a tooltip, and each one is a clickable link to the source.

This was a direct request from users who needed a faster way to cross-reference line items with their source material during cost recovery review.
You'll see the new column the next time you run a "By Capture" report under Cost Recovery.
Sharing a folder with your teammates no longer means typing out each email address. When you click into the invite field in the Share dialog, you'll see everyone at your firm, ready to add.

What's new
- Click into the email field to see your firm's members, with their names, emails and photos
- Click a name to add that person, or start typing to filter by name or email
- Use Select everyone at my firmat the top of the list to add all your colleagues at once
- People who already have access to the folder aren't listed, so you won't send duplicate invites
- You can still type or paste any email address, including people outside your firm
Built for sharing with large teams
If you add a big group, the invite list scrolls inside the Share dialog so the dialog stays on screen. Large batches of invites are also more reliable now, and if an invitation can't be sent, we'll tell you exactly which addresses to try again.
Try it
Open any folder, click
Share
and click into the email field. Choose who to invite, then click Send Invite
.Note: Select everyone invites the people at your firm right now. Colleagues who join later aren't added automatically, so you'll need to invite them when they start.
As shown in your portal over the past few months, today marks the retirement of the legacy Page Vault browser. Browser usage has been shifting since launch and over 95% of it already happens in the redesigned browser.
What's changing:
Starting today, every new session opens in the redesigned browser. Already mid-capture in a legacy session? It'll finish out normally, we're not cutting anyone off.Why we're doing this:
We built the redesigned browser to be the best way to capture the web. It's faster, has a streamlined UX, and uses the latest and greatest capabilities that our team has developed. Retiring the legacy version means every future improvement lands here first, for everyone.If today's your first time in the redesigned browser:
capture controls now live in a panel on the left instead of across the top, and with Batch capture built right in there's no need to copy and paste cookies. You'll find Batch capture at the bottom of the sidebar.
Getting started:
Nothing to set up on your end. If you'd like a refresher, updated guides and walkthroughs are live in our Help Center.Let support know if you're having any issues fully migrating to the new browser. We're tracking issues one by one and actively improving the new browser and offering trainings.
Load More
→